Find us on LinkedIn

Subtotal: £0.00

No products in the basket.


ServerTech Smart POPS PDU

The Server Technology® PRO2 Smart/Switched POPS PDU provides control of outlet power(Switched only) and local LED input current monitoring, allowing IT personnel to determine safe levels of loading on a per-phase basis while installing equipment into the rack/cabinet. The integral PIPS® and POPS® technology provides billing-grade accurate measurement of current, voltage, active power, apparent power, power factor, crest factor, and accumulated energy at the input and at each output (POPS only). These power data points, along with temperature and humidity measurements (provided via optional probes), are accessible through the built-in Web and CLI interfaces as well as through SNMP. The PRO2 Smart/Switched POPS “Master” PDU can be connected to as many as three (with optional module) PRO2 Smart/Switched POPS “Link” PDUs to extend the network access to the redundant or secondary power feed without the risks of a daisy chain linking configuration.

Use the linked Configurator tool on the tab below to find the right PDU for your application, or talk to one of our experts by email at or by phone 01634 291191.

Image is representative, other configurations may be available.

Knowledgable Advisors

Call us on 01634 291191

Next Day Delivery

On hundreds of items

Featuring highly accurate, outlet-level power monitoring,. Email alerts provide automated updates on power and environmental conditions.

Smart POPS PDUs are also designed with expandability in mind. Expansion PDUs may be used to provide full access to all power feeds under a single IP address. SNMP trap email automated alerts provide consistent insight into your outlet’s power levels and surrounding conditions.

With Per Outlet Power Sensing, each unit provides measurements for loads (amps), voltage (V), active power (W), apparent power (VA), crest factor, power factor and energy power consumption. With Smart POPS, environmental monitoring is a snap. Smart POPS PDUs feature built-in LED current monitors, which feature an Ethernet, serial and temperature/humidity monitoring port, while optional temperature and humidity probes on 10 ft. (3 m) cords allow for measurements to be taken in different locations within the cabinet.

More about POPS:

  • Simple, secure, integral web interface GUI configuration tool
  • Temperature and Humidity Support
  • Authentication logging, configuration changes and system events
  • Secure Syslog protocol support
  • Automatic Firmware Updates via FTP server
  • Emails log, event, authorization, power & configuration messages
  • Strong Password Support and Pre-Login Banner
  • Ability to Ping an IP address to see if the device is responding
  • SNMP: Traps based on Status, Changes, Load, Temperature & Humidity

PDU Configurator

Click here to open the ServerTech PDU Selector

Have a question or need some advice?

Shopping Cart